TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-75
STATS Command
The following command is valid even if you have not assumed the TCPMON name:
-> START SUBNET $ZZTCP.SN1
Considerations
•
The object-name template (wild-card notation) is supported.
•
When you use the START command, the object must be in the STOPPED
summary state.
•
The SLSA subsystem must be operational before subnets can be started
successfully.
•
To terminate the operation of subnets, use the STOP or ABORT command.
•
For the two subnets configured as a failover pair, you cannot start either of the
subnets before the ASSOCIATESUB command is done.
STATS Command
The STATS command returns statistics for a specified PTCPIP object. The STATS
MON command returns statistics for the TCPMONs running in every processor while
the STATS PROCESS command for TCPSAM returns statistics only for the processor
in which the TCPSAM process resides. All statistics are 32-bit numbers. The letter D in
the display values indicates that the value is a doubleword.
Whenever a RESET option is included, the counters associated with the specified
objects are displayed and reset to 0, and the timestamp for the reset is recorded. Any
STATS command returns the time at which the current statistics were sampled and the
time at which the counters were last reset.
This is a nonsensitive command except when used with the reset option. When used
with the reset option, it is a sensitive command.