TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-80
STATS MON Command for TCPMAN
Bad Offset
is the number of packets received with invalid data offsets in their TCP headers. An
invalid data offset usually indicates that either the sender of the packet made an
internal error in generating the packet, or the receiver of the packet had a byte-
swapping problem. This error is rare and is usually seen only during the
development of the protocol.
Bad Sequence
is the number of packets with bad sequence numbers.
Bytes Recv After Win
is the number of bytes received exceeding the window boundary.
Conn Dropped Timeouts
is the number of connections dropped in a transmit timeout.
Connections Closed
is the number of connections closed (this value includes the number of
connections dropped).
Connections Dropped
is the number of connections dropped.
Control Packets Sent
is the number of SYN, FIN, and RST control packets sent.
Data Bytes Received
is the number of bytes received in sequence.
Data Bytes Sent
is the total number of data bytes sent.
Data Packets Received
is the number of packets received in sequence.
Data Packets Sent
is the total number of data packets sent.
Delayed ACKs Sent
is the number of delayed ACKs sent.