TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-104
STATS PROCESS Command for TCPSAM
Urgent Packets Sent
is the number of packets sent with the URG bit set.
Window Probes Sent
is the number of window probes sent.
Window Update PKT Sent
is the number of window update packets sent.
Window Probe PKTs Recv
is the number of window-probes packets received.
Window Update Pkts
is the number of window update packets received.
Description of Statistics for the UDP Layer (in Alphabetical Order)
Bad Checksum
is the number of packets received with invalid checksum values. An invalid
checksum is usually caused by a noisy link.
Bad Packet Size
is the number of packets received that contain either more or less data than has
been specified in their headers. This error indicates the sender has a protocol error
or that the receiver has a byte-ordering problem.
Input Packets Dropped
is the number of packets not forwarded to socket applications because of receive
socket space being full.
Invalid Header Size
is the number of packets received with invalid header size. This error indicates a
problem between IP and UDP.
Output Packets Dropped
is the number of packets not sent because of interface problems.
Total Packets Input
is the number of packets received.
Total Packets Output
is the number of packets sent to the IP layer.