TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-115
STATS ROUTE Command for TCPMAN
Total Reports Input
is the total number of IGMP membership reports received.
Bad Reports
is the total number of bad IGMP membership reports received.
Reports For Our Groups
is the total number of IGMP membership reports received for groups we belong to.
STATS ROUTE Command for TCPMAN
The STATS ROUTE command displays the Parallel Library TCP/IP subsystem
statistics for the specified routes.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ROUTE $ZZTCP.#ZPTMn.route-name
is the name of the route. The fully-qualified name for the ROUTE is
$ZZTCP.#ZPTM{0-F}.route-name. If you omit the object name, SCF uses the
assumed object name. For information about the ASSUME command, see the
SCF Reference Manual for G-Series RVUs. You may use the wild card (*) in place
of the TCPMON name; this yields statistics for the route on all TCPMONs. You also
may use the wild card in place of the route name; this yields statistics for all routes
either on the specified TCPMON or, if the wild card is also used for the TCPMON,
on all TCPMONs.
RESET
resets the statistical counters to zero. (This option is sensitive.)
Examples
The following command requests statistics about all running routes:
SCF> STATS ROUTE $ZZTCP.*.*
Note. STATS ROUTE with the RESET option is sensitive.
STATS [ / OUT file-spec / ] [ROUTE $ZZTCP.#ZPTMn.route-name]
[, RESET ]