TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-118
STATS SUBNET Command for TCPMAN
STATS ROUTE Display Format
The format of the display for a ROUTE object is:
Sample Time
is the time when the statistics were sampled (displayed or written to a file).
Reset Time
is the time when the counters were last reset to zero.
Name
is the name of the route.
Route Usage
is the number of times this route was used to send IP datagrams.
STATS SUBNET Command for TCPMAN
The STATS SUBNET command displays the statistical information for the specified
subnets in a given TCPMON or in all configured TCPMONs.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SUBNET $ZZTCP.#ZPTMn.subnet-name
is the name of the subnet. The fully-qualified name of the subnet is
$ZZTCP.#ZPTM{0-f}.subnet-name. You may substitute the wild card (*) for the
TCPMON name; doing so yields statistical information for subnets configured on all
TCPMONs. If you omit the object name, SCF uses the assumed object name. For
information about the ASSUME command, see the SCF Reference Manual for G-
Series RVUs.
TCPIP Stats ROUTE \SYSA.$ZSAM1.*
Sample Time ... 23 March 1996, 17:18:25.334
Reset Time .... 23 March 1996, 11:47:47.166
Name Route Usage
#ROU1 10709D
STATS [ / OUT file-spec / ]
[SUBNET $ZZTCP.#ZPTMn.subnet-name]
[ , RESET ] [ , DETAIL ]