TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-122
STATS SUBNET Command for TCPSAM
SUBNET $tcpsam-process.subnet-name
is the name of the subnet. The fully-qualified name of the subnet is $tcpsam-
process.subnet-name. If you omit the object name, SCF uses the assumed
object name. For information about the ASSUME command, see the SCF
Reference Manual for G-Series RVUs.
RESET
resets the statistical counters to zero.
DETAIL
requests the detailed status information for the subnet.
Example
The following example requests statistics for all running subnets in the processor
containing the TCPSAM process:
->STATS SUBNET $ZSAM1.*
STATS SUBNET Display Format
The format of the display for the STATS SUBNET command is:
Sample Time
is the time when the statistics were sampled (displayed or written to a file).
Reset Time
is the time when the counters were last initialized (set to zero).
Name
is the name of the subnet.
TCPIP Stats SUBNET \SYSTEM.$ZSAM1.*
Sample Time ... 19 Feb 1998, 9:00:56:.054
Reset time ... 18 Feb 1998, 21:09:10.986
Name Output Input Output Input Filter Filter
Packets Packets Errors Errors Errors Timeouts
#LOOP0 0D 0D 0D 0D 0D OD
SAMPLE TIME ... 19 FEB 1998, 9:00:56:055
RESET TIME .... 19 FEB 1998, 7:36:15.674
NAME Output Input Output Input Filter Filter
Packets Packets Errors Errors Errors Timeouts
#SN1 1033D 4496D 0D 0D 0D 0D