TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-123
STATUS Command
Output Packets
is the number of packets sent by the subnet.
Input Packets
is the number of packets received by the subnet.
Filter Errors
indicates the number of errors received from SLSA for filter registrations.
Filter Timeouts
indicates that the filter registration is not receiving a reply from SLSA in the allowed
time.
Output Errors
is the number of errors that occurred when packets were sent by the subnet. Each
output error also generates one of the following operator messages:
DEVICE READ ERROR error ON IOP iopname
DEVICE WRITE ERROR error ON IOP iopname
ERROR error ON IOP iopname
Input Errors
is the number of errors detected when packets were received by the subnet. Each
input error also generates one of the following operator messages:
DEVICE READ ERROR error ON IOP iopname
DEVICE WRITE ERROR error ON IOP iopname
ERROR error ON IOP iopname
STATUS Command
The STATUS command reports the status of the specified PTCPIP object. Use the
status command with the wild-card (*) option whenever you want to find out the names
of TCPMON, route, entry and subnet objects in the Parallel Library TCP/IP subsystem.
For example, if you have ASSUMED PROCESS $ZZTCP, the STATUS MON *
command lists all the running TCPMON objects in the system and the STATUS
ROUTE *.* command lists all the running routes in the system.