TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-124
STATUS ENTRY Command for TCPMAN
STATUS ENTRY Command for TCPMAN
The STATUS ENTRY command displays the dynamic status of the specified entry in a
given TCPMON or in all configured TCPMONs.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ENTRY $ZZTCP.#ZPTMn.entry-name
is the name of the entry. The fully-qualified name of the entry object is
$ZZTCP.#ZPTMn.entry-name. You may substitute the wild card (*) for the
TCPMON name; doing so yields the status information for the specified entry on all
TCPMONs (in all processors). You may substitute the wild card (*) for the entry
name; doing so yields the status information for the all entries either on all
TCPMONs, if you used the wild card for the TCPMON or on the specified
TCPMON.
If you omit the object name, SCF uses the assumed object name. For information
about the ASSUME command, see the SCF Reference Manual for G-Series RVUs.
Examples
The following commands return status information about all entries contained in the
ARP entry table:
-> ASSUME PROCESS $ZZTCP
-> STATUS ENTRY *.*
STATUS ENTRY Response Display
The format of the STATUS ENTRY display is:
Name
is the name of the entry. The entry type is indicated in parentheses to the right of
the name.
STATUS [ / OUT file-spec / ]
[ ENTRY $ZZTCP.#ZPTMn.entry-name]
Name:(ARP) IPADDRESS........ 172.16.119.1
Arp Timer........... 19 (Min) Arp Flags........ (INUSE,COM)
MacAddress.......... %H00 000C 3920CE