TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-127
STATUS MON Command for TCPMAN
Status
indicates the state of the TCPMON.
PID
is the process ID of the TCPMON in the PTCPIP subsystem.
Proto
is the protocol associated with the socket, which can be UDP (for a UDP socket),
TCP (for a TCP socket), or a protocol number (for a raw IP socket).
State
is the current state of the socket; it applies only to sockets whose Proto value is
TCP. The possible values are:
CLOSING
if waiting for a terminate connection request acknowledgment from the remote
site.
CLOSE-WAIT
if waiting for a terminate connection request from the local user.
ESTAB
if the connection is open and the user can send and receive data. This is the
normal state for data transfer.
FIN-WAIT-1
if waiting for a terminate connection request from the remote TCP site or if
waiting for acknowledgment of the terminate connection request that the
process has sent previously.
FIN-WAIT-2
if waiting for a termination of data to be received after having sent a FIN
(termination of data being sent).
LISTEN
if waiting for a connection request from any remote TCP site.
LAST-ACK
if waiting for acknowledgment of the terminate connection request previously
sent to the remote site (which includes an acknowledgment of its terminate
connection request).