TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-129
STATUS PROCESS Command for TCPMAN
Multicast Group States
is the state of the multicast groups. Possible values are:
STARTED
indicates that multicast is operational for the group.
STARTING
indicates that the multicast group is transitioning to the STARTED (and
operational) state but is not yet fully operational.
STOPPED
indicates that multicast is not operational for the group.
STATUS PROCESS Command for TCPMAN
The STATUS PROCESS command displays the TCPMAN's primary and backup
information.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
PROCESS $ZZTCP
is the name of the TCPMAN process. If you omit the object name, SCF uses the
assumed object name. For information about the ASSUME command, see the
SCF Reference Manual for G-Series RVUs.
Examples
This command displays the primary and backup information for the TCPMAN process,
$ZZTCP.
-> STATUS PROCESS $ZZTCP
STATUS PROCESS Display Format
The format of the display for STATUS PROCESS is:
STATUS [ / OUT file spec / ] [ PROCESS $ZZTCP ]
TCPMAN Status PROCESS \BEAR.$ZZTCP
PPID............ ( 2,269) BPID................... ( 3, 272)