TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-161
SELECT Command
ON
turns on octal display mode.
OFF
turns off octal display mode.
Considerations
•
If the OCTAL command is not used, the OFF attribute is assumed.
•
If OCTAL is specified without the ON or OFF attribute, the ON attribute is
assumed.
•
The RESET and FROM commands set the OCTAL command to OFF.
SELECT Command
The SELECT command establishes the selection criteria that control which trace
records are to be displayed.
Command Syntax
mask
is a decimal integer that specifies a selection mask. The number is converted into
a 32-bit mask and saved as an enumerated value. The acceptable range is 0
through 65535.
keyword
is a keyword either for the PROCESS object or the SUBNET object.
The following keywords apply to the PROCESS object:
SELECT [ mask ]
[ keyword ]
[ ( keyword [ , keyword ] ... ) ]
ALL All records
SOCKCMD Socket requests (bind, listen, accept, connect, send)
MSGSYS Message system interface
MALLOC Resource allocation and deallocation events
ROUTING Requests for route changes
UDP IDP interface layer