TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-162
SELECT Command
The following keywords apply to the SUBNET object:
Considerations
•
If the SELECT command is not entered, the default mask and keyword is ALL.
•
If the SELECT command is specified with no mask or keywords, the ALL keyword
is assumed.
•
The ENV command allows you to see which SELECT keywords are currently being
used.
•
PTrace prints the Parallel Library TCP/IP VPROC version of the Parallel Library
TCP/IP process that is creating a trace file.
•
Parallel Library TCP/IP collects detailed location debugging information with each
trace point.
•
The ENV command allows you to see which SELECT keywords are currently being
used.
•
Parallel Library TCP/IP and PTrace collect and decode detailed SOCKET and
internal TCP control block information when SOCKCMD or TCP are selected for
the PROCESS object.
Examples
1. The following command sequence can be used to trace and decode SOCKET
command requests and responses during a PROCESS object trace:
TRACE PROCESS $ZTC0,TO TRACEFL,RECSIZE 750,SELECT SOCKCMD
TCP Transmission Control Protocol message layer
IP IP layer
LOGIC Several of the above selections including socket requests
(SOCKCMD) and message system interface (MSGSYS)
ALL All records
IPI IP input records
IPO IP output records
ARPI ARP input records
ARPO ARP output records
LOGIC A combination of all the above records
USERDATA Used with IPI and IPO to display user data