TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-165
Socket Creation Records
seq-no
indicates the sequence number. The sequence number is included to keep track of
records that are lost when the trace file is written to disk. The sequence number
counts from 0 to 255 and then begins again.
time
indicates the time since the last trace run on this line.
timestamp
indicates the timestamp of the record. The timestamp reports the time at which the
record was captured. The resolution is to one hundredth of a second.
type
indicates the record-type code. The record-type code identifies the type of
information contained in the record. It is subsystem-dependent.
Socket Creation Records
This subsection describes the formatted trace records displayed when the SOCKCR
keyword is specified for the PTrace SELECT command. Note that all of the socket
creation records are preceded by a header containing the record-type code 1. The
records are presented in alphabetical order, based on the text format.
Attach Socket Protocol Record
The attach socket protocol record is generated when a socket is attached to a protocol.
nnnnaaaa
indicates the internal socket ID of the socket being attached to a protocol.
n
indicates the IP number of the protocol being attached to the socket. For a list of
commonly used IP numbers, refer to the TCP/IP and TCP/IPv6 Programming
Manual. For a complete list of the IP numbers, refer to Request for Comments
document 1010, Assigned Numbers.
header
attach socket_handle nnnnaaaa proto #n