TCP/IP (Parallel Library) Configuration and Management Manual

SCF Error Messages

HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006

B-2

PTCPIP 00005

attribute-name

is the name of the attribute you specified in an ALTER PROCESS command.

Cause. You specified a value for the ALTER PROCESS command that is outside the

valid range.

Effect. The command is not executed.

Recovery. Enter a valid range for the command and retry it. Refer to the ALTER

command in Section 5, SCF Reference for Parallel Library TCP/IP, for more

information on valid ranges.

PTCPIP 00007

Cause. The IP address you specified in the ADD SUBNET or ALTER SUBNET

command is already being used by another interface.

Effect. The command is not executed.

Recovery. Specify a different IP address and retry the command.

PTCPIP 00008

Cause. The gateway you specified in the ADD ROUTE command is unavailable.

Effect. The command is not executed.

Recovery. Specify an available gateway and retry the command.

PTCPIP 00009

Cause. A file-system error occurred.

Effect. The command is not executed.

Recovery. Take an action based on the file system error received.

PTCPIP 00005 Attribute value out of range attribute-name.

PTCPIP 00007 Duplicate address.

PTCPIP 00008 Gateway Network Unreachable.

PTCPIP 00009 Filesystem error.