TCP/IP (Parallel Library) Configuration and Management Manual

Configuration Quick Start
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
1-18
Starting Parallel Library TCP/IP Using the
Persistence Manager
7. Test the Parallel Library TCP/IP environment.
You can use the INFO SUBNET Command for TCPMAN to get the IP address for
use in the following command sequence:
Starting Parallel Library TCP/IP Using the
Persistence Manager
Use this procedure to start Parallel Library TCP/IP if TCPMAN has been added to the
system configuration database as a persistent generic process. (See Stopping Parallel
Library TCP/IP as a Generic Process on page 1-29 and Managing the System
Configuration Database on page 4-1.)
Task Summary
Task 1: Check all assumptions.
Task 2: Start the generic process.
Task 2: Add TCPSAM processes.
Tasks: Starting Parallel Library TCP/IP Using Persistence
Manager
1. Check that the following assumptions are met.
a. Check that TCPMAN has been added as a generic process to the system
configuration database. (See Managing the System Configuration Database on
page 4-1 for more information.) Enter the following command at the SCF
prompt:
b. Check that the STARTMODE parameter of the generic TCPMAN process is
MANUAL. (If the parameter is SYSTEM, you need not start the process since the
persistence manager automatically starts it.) Enter the following command at
the SCF prompt:
2. Start the generic process for TCPMAN by entering the following SCF command:
>TELNET ip-address
>TACL
>LOGON SUPER.SUPER
->STATUS PROCESS $ZZKRN.#ZZTCP
->INFO PROCESS $ZZKRN.#ZZTCP, DETAIL
-> START PROCESS $ZZKRN.#ZZTCP