TCP/IP (Parallel Library) Configuration and Management Manual
Configuration Quick Start
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
1-25
Tasks: Stopping Parallel Library TCP/IP and Clearing
the Database
The above sample display shows that there are four TCPMONs running (shown in
the Program column) named $ZPTM1, $ZPTM3, $ZPTM2, and $ZPTM0. Also,
one TCPMAN process ($ZZTCP) is running.
2. Perform this step if you are not using TSM. Ensure that you do not stop the TCP/IP
environment that is running your home terminal.
a. Enter WHO at the TACL prompt:
The following sample display results from the TACL WHO command:
b. The TELSERV process, $ZTNP1, is listed next to the HOME TERMINAL field.
Make note of the TELSERV process name (just the portion following the dollar
sign ($)).
a. Check all TCP/IP processes and find the one that has your TELSERV
process listed as an opener. This is the process that you do not want to
shut down.
The following sample displays results from the LISTDEV TCPIP command
and shows all the TCP/IP processes in the system:
b. Issue a LISTOPENS PROCESS $process-name on each of the
processes listed in the display for LISTDEV TCPIP until you find the
process that is running the TACL prompt of your home terminal (identified
in Step 2b on page 1-25.)
>WHO
\HOME.$SYSTEM.SYSTEM 2> who
Home terminal: $ZTNP1.#PTYPRAB
TACL process: \HOME.$Z34A
Primary CPU: 2 (NSR-G)
Default Segment File: $SYSTEM.#0000382
Pages allocated: 24 Pages Maximum: 1024
Bytes Used: 32820 (1%) Bytes Maximum: 2097152
Current volume: $SYSTEM.SYSTEM
Saved volume: $SYSTEM.SYSTEM
Userid: 255,255 Username: SUPER.SUPER Security: "AAAA"
Logon name: SUPER.SUPER
>SCF
->LISTDEV TCPIP
-> listdev tcpip
LDev Name PPID BPID Type RSize Pri Program
204 $ZTC0 1,302 0,322 (48,0 ) 32000 200 \HOME.$SYSTEM.SYS07.TCPIP
298 $TCPS3 3,278 0,0 (48,0 ) 57344 201 \HOME.$JER01.THJAGUAR.TCPSAM
305 $TCPS1 1,341 0,0 (48,0 ) 57344 201 \HOME.$JER01.THJAGUAR.TCPSAM
332 $ZTC01 0,301 1,389 (48,0 ) 57344 201 \HOME.$SYSTEM.SYS07.TCPSAM
->LISTOPENS PROCESS $ZTC0