TCP/IP (Parallel Library) Configuration and Management Manual

Configuration Quick Start
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
1-32
Tasks: Stopping Parallel Library TCP/IP as a Generic
Process
In the above sample display, you would record all the opener processes: $ZPT0,
$ZTN0, $ZTF0, $Z0KW, $Z0KX, $ZTN0, and $Z07S to be stopped in Step 6.
5. List the names of the TCPSAM processes running in the Parallel Library TCP/IP
environment. Enter the following command at the SCF prompt:
Make a note of the names of the running TCPSAM processes (indicated in the last
field of the Program column).
The following sample display results from the LISTDEV TCPIP command and
shows all the TCP/IP processes running in the system:
In the above display, the TCPSAM processes are $TCPS1, and $ZTC01.
6. Stop all openers of the TCPMONs (from Step 4). (Note that LISTNER and
TELSERV do not support the SCF ABORT command so you must use the TACL
STOP command to stop those processes.) Enter the following commands at the
TACL prompt:
7. Abort all TCPSAM processes (from Step 5). Enter the following commands at the
SCF prompt:
8. Issue the following SCF command to the NonStop Kernel subsystem:
-> listopens mon $zztcp.*
PTCPIP Listopens MON \HOME.$ZZTCP.#ZPTM0
Openers PPID BPID PLFN BLFN Protocol Lport
$ZLIS3 0,295 5 0 TCP echo
$ZLIS3 0,295 6 0 TCP finger
$ZLIS3 0,295 7 0 TCP ftp
$ZTEL3 0,277 3 0 TCP telnet
->LISTDEV TCPIP
-> listdev tcpip
LDev Name PPID BPID Type RSize Pri Program
170 $ZTC1 0,291 1,289 (48,0 ) 32000 200 \HOME.$SYSTEM.SYS07.TCPIP
186 $ZTC0 1,293 0,302 (48,0 ) 32000 200 \HOME.$SYSTEM.SYS07.TCPIP
215 $ZTC01 0,285 1,313 (48,0 ) 57344 201 \HOME.$SYSTEM.SYS07.TCPSAM
240 $TCPS1 1,267 0,0 (48,0 ) 57344 201 \HOME.$JER01.THJAGUAR.TCPSAM
>STOP PROCESS $ZLIS3
>STOP PROCESS $ZTEL3
->ABORT PROCESS $ZTC01
->ABORT PROCESS $TCPS1
-> ABORT PROCESS $ZZKRN.#ZZTCP