TCP/IP (Parallel Library) Configuration and Management Manual

Configuring Parallel Library TCP/IP for Complex and
Heavy-Use Environments
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
3-23
Example for Two Gateways — Standard Listening
Model
Example for Two Gateways — Standard
Listening Model
This example demonstrates the standard listener model discussed above (see
Standard Listening Model on page 3-2). This example shows an environment that has
two gateways leading to two subnets on a NonStop S-series server (host).
The startup files for establishing two gateways and subnets are the same as those for
Configuration Example for the Standard Listening Model on page 3-11.
The files used in this example for starting and configuring the Parallel Library TCP/IP
environment include:
•
The TCPIPUP1 File on page 3-13 which starts the Parallel Library TCP/IP
environment.
•
The TCPIPUP6 File on page 3-25, the main command file (a TACL command file),
which calls the other files, sets up the HOSTS file, calls SCFSBNT, and starts the
LISTNER.
•
The SCFSBNT2 File on page 3-26, which adds, configures, and starts the subnets
and routes.
This configuration example is shown in Figure 3-10.