TCP/IP (Parallel Library) Migration Guide

Migration Considerations
HP NonStop TCP/IP (Parallel Library) Migration Guide—522272-003
3-9
Management Interfaces
4. Obey TCPIPUP.
5. Start TCPSAM.
+ START MON *
==Run monitors in every processor. If you do not,
==then modify Steps 4
and 5 for the LISTNER,
==TCPSAM, and TELSERV processes to run
only in
==those processors which have a monitor
running in
==them.
==There is no MON object
+DELAY 2
==Pause to allow MONs to start
+ ALTER MON *, HOSTNAME “breeze” + ALTER,HOSTNAME "breeze"
+ ALTER MON *, HOSTID 150.20.30.1 + ALTER,HOSTID 150.20.30.1
+ STOP SUBNET LOOP0
==You must stop the loopback subnet because
==loopback started automatically when you
started
==the MONs
==There is no need to stop the SUBNET
+ ALTER SUBNET LOOP0,IPADDRESS 127.1 + ALTER SUBNET #LOOP0, IPADDRESS 127.1
+ START SUBNET LOOP0 +START SUBNET LOOP0
+ ADD SUBNET SN0,TYPE &
ETHERNET,DEVICENAME LAN01, &
IPADDRESS 150.20.30.1, SUBNETMASK &
%%HFFFFFF00
+ ADD SUBNET #SN0,TYPE &
ETHERNET,DEVICENAME LAN01, &
IPADDRESS 150.20.30.1
==You can set the subnet mask in the ADD
SUBNET ==command
+ ALTER SUBNET #SN0,SUBNETMASK &
%%HFFFFFF00
+ ADD ROUTE ROUTE0,DESTINATION &
0.0.0.0,GATEWAY 150.20.30.2
+ ADD ROUTE #ROUTE0,DESTINATION &
0.0.0.0,GATEWAY 150.20.30.2
+ START SUBNET * + START SUBNET *
+ START ROUTE * + START ROUTE *
INLEOF INLEOF
Parallel Library TCP/IP Conventional TCP/IP
OBEY TCPIPUP OBEY TCPIPUP
Parallel Library TCP/IP Conventional TCP/IP
ADD DEFINE =_SRL_01,CLASS MAP, FILE
& $SYSTEM.SYS01.ZTCPSRL
==No equivalent command
RUN TCPSAM/NAME $ZTC1, NOWAIT,
TERM & $ZHOME, IN $ZHOME, OUT
$ZHOME, CPU 0/1
Parallel Library TCP/IP Command File Conventional TCP/IP Command File