TCP/IP Programming Manual

A group of items enclosed in brackets is a list of all possible items that can be displayed, of
which one or none might actually be displayed. The items in the list can be arranged either
vertically, with aligned brackets on each side of the list, or horizontally, enclosed in a pair of
brackets and separated by vertical lines. For example:
proc-name trapped [ in SQL | in SQL file system ]
{ } Braces
A group of items enclosed in braces is a list of all possible items that can be displayed, of
which one is actually displayed. The items in the list can be arranged either vertically, with
aligned braces on each side of the list, or horizontally, enclosed in a pair of braces and
separated by vertical lines. For example:
obj-type obj-name state changed to state, caused by
{ Object | Operator | Service }
process-name State changed from old-objstate to objstate
{ Operator Request. }
{ Unknown. }
| Vertical Line
A vertical line separates alternatives in a horizontal list that is enclosed in brackets or braces.
For example:
Transfer status: { OK | Failed }
% Percent Sign
A percent sign precedes a number that is not in decimal notation. The % notation precedes an
octal number. The %B notation precedes a binary number. The %H notation precedes a
hexadecimal number. For example:
%005400
%B101111
%H2F
P=%p-register E=%e-register
Notation for Subnet
The following describes the notation conventions for SUBNET and subnet used in this manual.
UPPERCASE LETTERS
Uppercase letters indicate the NonStop TCP/IP, Parallel Library TCP/IP or NonStop TCP/IPv6
SCF SUBNET object. For example:
Port A is identified by logical interface (LIF) 018, which uses a SUBNET on the TCP/IP process
named $ZB018 in processor 0.
lowercase letters
Lowercase letters indicate the general networking term for subnet. For example:
Multicast datagrams that have a Time-To-Live (TTL) value of 1 are forwarded only to hosts on
the local subnet.
Notation for Management Programming Interfaces
This list summarizes the notation conventions used in the boxed descriptions of programmatic
commands, event messages, and error lists in this manual.
Notation Conventions 19