TCP/IP TELNET Management Programming Manual

Relationship With Other Subsystems
Introduction
1–4 53474 Tandem Computers Incorporated
Figure 1-1. Relationship to Other Subsystems
001
ETHERNET
Interface
MLAM (TLAM IOP)
CONFIG
SCFSCP
MLMAN
MLMUX
Controller
5600
(ETHERNET 802.3)
TELNET
TCP/IP
Subsystem
Subsystem
Architecture
The TELNET subsystem consists of a process that controls as many as 128 windows or
pseudoterminals.
You can manage the TELNET subsystem through both interactive and programmatic
interfaces.
The interactive interface for managing the TELNET subsystem actually consists of two
interfaces:
The Subsystem Control Facility (SCF), which can be used to monitor, configure,
and control the subsystem. SCF provides an operator interface to the Subsystem
Control Point (SCP), which provides an interface to the TELNET subsystem.
The VIEWPOINT application, which can be used to interactively retrieve event
messages (previously sent to EMS by the subsystem).
For further details on the interactive interfaces, refer to the SCF Reference Manual for
Tandem TCP/IP TELNET and the VIEWPOINT Manual.
The programmatic interface for managing the TELNET subsystem also consists of two
interfaces: