TCP/IP TELNET Management Programming Manual

ABORT Command
Commands and Responses
53474 Tandem Computers Incorporated 6–7
ZSPI-TKN-SERVER-VERSION
indicates the software release version of the TELNET subsystem. See “SPI
Standard Definitions” in Section 5 for a detailed description of this token.
ZSPI-TKN-DATALIST
indicates the beginning of a data list. The ZSPI-TKN-MAXRESP token must have
a value other than zero or else data lists will not be included in the response. See
“SPI Standard Definitions” in Section 5 for a detailed description of this token.
ZCOM-TKN-OBJNAME
specifies the name of a TELNET window terminated by the command. Unless an
error prevents the ABORT command from being attempted at all, this token is
present in every response record. If you have used an object-name template, a
ZCOM-TKN-OBJNAME token is returned for each window that meets the
template requirements. ZCOM-TKN-OBJNAME is described more fully in “Data
Communications Standard Definitions” in Section 5.
ZCOM-TKN-OBJTYPE
specifies the type of object terminated. The only possible value is ZCOM-OBJ-
WINDOW. This token is present in every response record. The value of the
ZCOM-TKN-OBJTYPE token is the same as the value of the ZSPI-TKN-OBJECT-
TYPE token in the header. See Section 5, “Common Definitions,” for a detailed
description of this token.
ZSPI-TKN-RETCODE
specifies whether the command completed successfully. If the command
completed successfully, including when the command completes with a warning,
the value of this token is zero (ZCOM-ERR-OK). Note that if the empty response
(ZCOM-ERR-EMPT-RSP) is returned, the value of this token is nonzero even
though the command has completed successfully.
If the command did not complete successfully, the value of this token indicates the
reason the command failed. Always check the contents of the error list to
determine the token or value in error. For details on the ZCOM return codes and
associated error lists, see the Communications Management Programming Manual.
For details on the ZSPI return codes and associated error lists, see the Distributed
Systems Management (DSM) Programming Manual.