TCP/IP TELNET Management Programming Manual

ADD Command
Commands and Responses
53474 Tandem Computers Incorporated 6–13
(ZCOM-ERR-EMPT-RSP) is returned, the value of this token is nonzero even
though the command has completed successfully.
If the command did not complete successfully, the value of this token indicates the
reason the command failed. Always check the contents of the error list to
determine the token or value in error. For details on the ZCOM return codes and
associated error lists, see the Communications Management Programming Manual.
For details on the ZSPI return codes and associated error lists, see the Distributed
Systems Management (DSM) Programming Manual.
The following nonzero values of RETCODE can be returned in response to the
ADD command:
ZSPI-ERR-INVBUF (-1)
ZCOM-ERR-CMD-MISMATCH (-4)
ZCOM-ERR-CMD-TOO-LARGE (-8)
ZCOM-ERR-OBJ-ALRDY-DEF (-15)
ZCOM-ERR-OBJ-NOT-SUPP (-18)
ZCOM-ERR-OBJNAME-INV (-19)
ZCOM-ERR-SECUR-VIOL (-22)
ZCOM-ERR-SPI-ERR (-23)
ZCOM-ERR-SSID-INV (-24)
ZCOM-ERR-TKN-CODE-INV (-26)
ZCOM-ERR-TKN-DUP (-27)
ZCOM-ERR-TKN-REQ (-29)
ZSPI-TKN-ERRLIST
indicates the beginning of an error list. See “SPI Standard Definitions” in Section 5
for a detailed description of this token.
ZSPI-TKN-ENDLIST
indicates the end of a data list or an error list. See “SPI Standard Definitions” in
Section 5 for a detailed description of this token.
Operational Notes
ADD is a sensitive command.
When the command is successfully completed, the window is placed in the
STOPPED summary state.
The name given to a window must be unique for the process.
You can create a maximum of 128 windows on a process.
Some window attributes can also be modified by a TELNET client user in
command mode. For details on these window attributes, see the Tandem TCP/IP
Application User’s Manual.
Use the START command.to start a window that has been added