TCP/IPv6 Configuration and Management Manual (G06.24+)

Manage the NonStop TCP/IPv6 Subsystem
HP NonStop TCP/IPv6 Configuration and Management Manual524523-008
6-9
Preparing to Stop the NonStop TCP/IPv6 Subsystem
This sample display results from the TACL WHO command:
The TELSERV process, $ZTNP1, is listed next to the HOME TERMINAL field.
Make note of the TELSERV process.
b. Check all TCP/IP processes to find the one that has your TELSERV process
listed as an opener. This is the process that you do not want to shut down.
This sample display results from the LISTDEV TCPIP command and shows all
the TCP/IP transport processes in the system:
c. Make a note of the TCP6SAM processes (in this example, $TCPS3, $TCPS1,
$ZTC01) so that you can shut them down in your shutdown procedures (see
Example 6-1 on page 6-12.
d. Issue a LISTOPENS PROCESS $process-name on each process listed in
the display for LISTDEV TCPIP until you find the process that is running the
TACL prompt of your home terminal.
\HOME.$SYSTEM.SYSTEM 2> WHO
Home terminal: $ZTNP1.#PTYPRAB
TACL process: \HOME.$Z34A
Primary CPU: 2 (NSR-G)
Default Segment File: $SYSTEM.#0000382
Pages allocated: 24 Pages Maximum: 1024
Bytes Used: 32820 (1%) Bytes Maximum: 2097152
Current volume: $SYSTEM.SYSTEM
Saved volume: $SYSTEM.SYSTEM
Userid: 255,255 Username: SUPER.SUPER Security: "AAAA"
Logon name: SUPER.SUPER
>SCF
->LISTDEV TCPIP
Note. The LISTDEV TCPIP command shows the TCP6SAM and TCP/IP (conventional)
processes. The LISTDEV TCPIPV6 command shows the manager and monitor processes.
-> listdev tcpip
LDev Name PPID BPID Type RSize Pri Program
204 $ZTC0 1,302 0,322 (48,0 ) 32000 200 \HOME.$SYSTEM.SYS07.TCPIP
298 $TCPS3 3,278 (48,0 ) 57344 201 \HOME.$SYSTEM.SYS07.TCP6SAM
305 $TCPS1 1,341 (48,0 ) 57344 201 \HOME.$SYSTEM.SYS07.TCP6SAM
332 $ZTC01 0,301 1,389 (48,0 ) 57344 201 \HOME.$SYSTEM.SYS07.TCP6SAM
->LISTOPENS PROCESS $ZTC0