TCP/IPv6 Configuration and Management Manual (G06.24+)

What’s New in This Manual
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
xiv
Changes in the G06.26 and H06.03 Manual
°
Removed all the entries for ARP STATS and IGMP STATS and their
descriptions because they are not supported
•
Replaced the display format of the STATUS MON, DETAIL command under
STATUS MON, DETAIL Display Format on page 8-173.
•
Changed the description of the TRACE SUBNET command to specify that all
configured SUBNETs are traced (not a single defined SUBNET alone) under
TRACE SUBNET Command for TCP6MAN on page 8-203. Also changed the
description of the example under Examples on page 8-205.
•
Changed the syntax of these commands in Appendix B, SCF Command Summary:
°
INFO SUBNET command for TCP6MAN
°
STATS PROCESS command for TCP6SAM
Changes in the G06.26 and H06.03 Manual
•
Updated the manual to reflect support for the Integrity NonStop NS-series server.
•
NonStop TCP/IPv6 no longer requires that you define an SRL before starting the
TCP6SAM (socket access method) process.
°
Removed the step for defining the SRL from IVA. Prepare to Start the
Applications (Without LNP) on page 1-21, IVB. Prepare to Start the
Applications (With LNP) on page 1-21, Managing the TCP6SAM Process on
page 6-15, TACL Commands for Starting a TCP6SAM Process on page 6-15,
and Example 6-2, SAMUP, on page 6-16.
°
Removed the procedure Programmatic Interfaces to the SRL from
ZTCP6REL/ZTCP6SRL (for G-Series RVUs Only) on page 2-14.
•
Corrected the title of Example 1-10 on page 1-20.
•
Corrected the text under IVA. Prepare to Start the Applications (Without LNP) on
page 1-21.
•
Reorganized the Section 2, Overview of NonStop TCP/IPv6 to make architectural
topics more visible. (In previous editions, important topics such as Single IP on
page 2-5, Round-Robin Filtering on page 2-7, and Logical-Network Partitioning
(LNP) on page 2-8 were not visible in the table of contents nor were they as easy
to locate for readers scanning the overview section.)
•
Added information about dynamic linked libraries under ZTCP6DLL on page 2-15.
•
Modified the displays in Example 2-1 on page 2-21, Example 2-2 on page 2-22,
and under Preparing to Stop the NonStop TCP/IPv6 Subsystem on page 6-8 to
correctly reflect the BPID field.
•
Changed Section 5, Example Illustrations and Adding Features to the Basic
Configuration to emphasize adding more features.