TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-29
ADD SUBNET Command for TCP6MAN
The list is specified in quotations with the TCP6SAM processes separated by a
comma. For example:
LNPTPLIST "$ZSAM1, $ZSAM2"
IPv4 Examples
•
To add a SUBNET named SN1 of type Ethernet to all the TCP6MONs in the
system:
-> ADD SUBNET $ZZTCP.*.SN1, TYPE ETHERNET, DEVICENAME L02A, &
IPADDRESS 50.0.0.3
To add a SUBNET named SN4 to all the TCP6MONs in the system:
-> ADD SUBNET $ZZTCP.*.SN4, TYPE ETHERNET, DEVICENAME L104, &
IPADDRESS 50.0.0.1, SUBNETMASK %HFFFF0000
To add a SUBNET for a configured LNP:
-> ADD SUBNET $ZZTCP.*.SN1, TYPE ETHERNET, DEVICENAME L019, &
IPADDRESS 50.0.0.4, LNPTPLIST "$ZSAM1, $ZSAM2"
•
To add a SUBNET and associated SUBNET with failover enabled for nonshared IP
addresses:
-> ASSUME PROCESS $ZZTCP
-> ADD SUBNET SN1, TYPE ETHERNET, DEVICENAME LANLIF2, IPADDRESS
172.17.217.232, SUBNETMASK 255.255.255.0, FAILOVER NONSHAREDIP
-> ADD SUBNET SN2, TYPE ETHERNET, DEVICENAME LANLIF3, IPADDRESS
172.17.217.234, SUBNETMASK 255.255.255.0, FAILOVER NONSHAREDIP
•
To add a SUBNET and associated SUBNET with failover enabled for shared IP
addresses:
-> ADD SUBNET SN3, TYPE ETHERNET, DEVICENAME LANLIF4, IPADDRESS
172.17.217.44, SUBNETMASK 255.255.255.0, FAILOVER SHAREDIP
-> ADD SUBNET SN4, TYPE ETHERNET, DEVICENAME LANLIF5, IPADDRESS
172.17.217.44, SUBNETMASK 255.255.255.0, FAILOVER SHAREDIP