TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-43
ALTER MON Command for TCP6MAN
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
MON $ZZTCP.*
specifies all configured TCP6MONs. When you alter the MON, you must do so on
all configured MONs.
TCPSENDSPACE int
specifies the size of the window used for sending data for the TCP protocol. The
recommended range for is 512 bytes to 12k bytes. The default value is 8K.
ALTER [ /OUT file-spec/ ] MON $ZZTCP.*
[ ,TCPSENDSPACE int ]
[ ,TCPRECVSPACE int ]
[ ,UDPSENDSPACE int ]
[ ,UDPRECVSPACE int ]
[ ,DELAYACKS { ON | OFF } ]
[ ,DELAYACKSTIME int ]
[ ,HOSTNAME string ]
[ ,HOSTID int ]
[ ,TCPKEEPIDLE int ]
[ ,TCPKEEPINTVL int ]
[ ,TCPKEEPCNT int ]
[ ,DEBUG { ON | OFF } ]
[ ,FULLDUMP { ON | OFF } ]
[ ,ALLNETSARELOCAL { ON | OFF } ]
[ ,TCPCOMPAT42 { ON | OFF } ]
[ ,EXPANDSECURITY { ON | OFF } ]
[ ,TCPPATHMTU { ON | OFF } ]
[ ,TCPTIMEWAIT int ]
[ ,RFC1323-ENABLE { ON | OFF } ]
[ ,TCP-INIT-REXMIT-TIMEOUT int ]
[ ,TCP-MIN-REXMIT-TIMEOUT int ]
[ ,TCP-LISTEN-QUE-MIN int ]
[ ,INITIAL-TTL int ]
[ ,MIN-EPHEMERAL-PORT int ]
[ ,MAX-EPHEMERAL-PORT int ]
[ ,MAX-PRIV-PORT int ]
[ ,TCPCWNDMULTIPLIER int ]
[ ,TCPSACKON { ON | OFF } ]
[ ,NONSHAREDOUTDIST { ON | OFF } ]
[ ,FAMILY { INET | INET6 | DUAL } ]
[ ,TCP-MAX-REXMIT-TIMEOUT int ]
[ ,TCP-MAX-REXMIT-COUNT int ]
[ ,TCP-TOTAL-REXMIT-DURATION int ]
[ ,PORT-SHARE-ENABLE { ON | OFF } ]