TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-57
ALTER SUBNET Command for TCP6MAN
IPV6INTERFACEDID specification. This is required when you use a SHAREDIP
configuration.
Example 8-5 on page 8-57 configures two DUAL-mode SUBNETs as a
NONSHAREDIP Ethernet failover pair:
Example 8-6
configures two DUAL-mode SUBNETs as a SHAREDIP Ethernet failover
pair:
Example 8-4. Shared IP Ethernet Failover, INET6 Mode
-> ADD SUBNET SN3,TYPE ETHERNET, DEVICENAME LAN02, &
FAMILY INET6, FAILOVER SHAREDIP, IPV6RAENABLE ON, &
IPV6INTERFACEID "::ABCD:1234"
-> ADD SUBNET SN4,TYPE ETHERNET, DEVICENAME LAN03, &
FAMILY INET6, FAILOVER SHAREDIP, IPV6RAENABLE ON, &
IPV6INTERFACEDID "::ABCD:1234"
-> ALTER SUBNET SN3, ASSOCIATESUB "SN4", &
IPV6RESERVEDID "::ABCD:1235"
Example 8-5. Nonshared IP Ethernet Failover, DUAL Mode
-> ADD SUBNET EN1, TYPE ETHERNET, FAMILY DUAL, &
IPADDRESS 172.17.215.232, SUBNETMASK 255.255.255.0, &
IPV6RAENABLE OFF,&
IPV6PREFIX "3ffe:1200:214:1::/64", &
FAILOVER NONSHAREDIP, DEVICENAME LAN02,&
IPV6HOPLIMIT 255
-> ADD SUBNET EN2, TYPE ETHERNET, FAMILY DUAL, &
IPADDRESS 172.17.215.234, SUBNETMASK 255.255.255.0, &
IPV6RAENABLE OFF, &
IPV6PREFIX "3ffe:1200:215:1::/64", &
FAILOVER NONSHAREDIP, DEVICENAME LAN03,&
IPV6HOPLIMIT 255
-> ALTER SUBNET EN1, ASSOCIATESUB "EN2"