TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-64
INFO ENTRY Command for TCP6MAN
If you specify entry-name with a wild card (*) and do not specify the FAMILY
attribute, information about all entries in both the ARP table and Neighbor
Discovery cache is displayed.
OBEYFORM
causes the static ARP table configuration to be displayed in ADD ENTRY format,
so that this configuration can be re-created. Only those ENTRY objects explicitly
defined by an SCF ADD command are displayed (see ADD ENTRY Command for
TCP6MAN on page 8-19).
Examples
•
To return all information in the ARP table for the TCP6MON named #ZPTM2:
-> INFO ENTRY $ZZTCP.#ZPTM2.*, FAMILY INET
•
To return all information in the Neighbor Discovery cache for the TCP6MON named
#ZPTM2:
-> INFO ENTRY $ZZTCP.#ZPTM2.*, FAMILY INET6
-> INFO ENTRY $ZZTCP.#ZPTM2.N*, FAMILY INET6
•
To return information about all entries in the ARP table and Neighbor Discovery
cache for the TCP6MON named #ZPTM2:
-> INFO ENTRY $ZZTCP.#ZPTM2.*
•
To return information about the static ARP table in ADD ENTRY format:
-> INFO ENTRY *, OBEYFORM
INFO ENTRY Display Format (ARP Table Information)
The format of the display for the INFO ENTRY command shown in the first example is:
Name
is the name of the entry. The entry type is indicated in parentheses to the right. In
this case, the type is ARP.
IPADDRESS
is the IP address for the entry in dotted decimal format.
TCPIPV6 Info ENTRY \MYSYS.$ZZTCP.#ZPTM2.*, FAMILY INET
Name: EA1 (ARP)
IPADDRESS.... 172.17.217.1
MacAddress... %H00 000C 3920C8 ALLENTRY - OFF
Associated Subnet... EN1