TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-72
INFO MON Command for TCP6MAN
value. Ports between MAX_PRIV_PORT and MIN-EPHEMERAL-PORT are
available for applications without super group status.
TCPCWNDMULTIPLIER
is a value that is used to calculate the initial TCP congestion window. The value for
TCPCWNDMULTIPLIER is multiplied by the TCP maximum segment size (MSS) to
calculate a value for the TCP congestion window. Therefore, the
TCPCWNDMULTIPLIER attribute allows for the setting of a larger initial window
value on a TCP connection. The default value for this attribute is 2. The allowed
range is 1 though 10.
TCP SACKON { ON | OFF }
specifies whether or not all TCP connections use TCP selective
acknowledgements, unless such selective acknowledgements are specifically
disabled by an application. ON enables selective acknowledgements. OFF
disables them. The default value is OFF.
NONSHAREDOUTDIST
specifies whether or not the outbound data paths for connections over Nonshared
IP failover pairs are distributed over both SUBNETs of the failover pair. On enables
distribution over both SUBNETs. OFF disables it.
FAMILY
specifies the network mode of the TCP6MON. Possible values are INET, INET6,
and DUAL.
Total LNPs Configured
is the number, not counting the default LNP, of logical-network partitions
configured.
TCP-MAX-REXMIT-TIMEOUT
is the maximum time value, in milliseconds, allowed for a TCP retransmission
timeout.
TCP-MAX-REXMIT-COUNT
is the maximum number of continuous retransmissions allowed before a TCP
connection is dropped.
TCP-TOTAL-REXMIT-DURATION
is the total time a TCP connection can be in the retransmission state without
receiving an acknowledgement from the other endpoint before the TCP connection
is dropped.