TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual524523-008
8-74
INFO PROCESS Command for TCP6SAM
INFO PROCESS Display Format
The format of the display for the INFO PROCESS command both with and without the
DETAIL option is the same:
PROCESS $ZZTCP
is the name of the manager process (TCP6MAN). If you omit the object name,
SCF uses the assumed object name. For information about the ASSUME
command, see the SCF Reference Manual for G-Series RVUs or the SCF
Reference Manual for H-Series RVUs.
PPID
is the primary processor and PIN of the process.
BPID
is the backup processor and PIN of the process.
INFO PROCESS Command for TCP6SAM
This command displays the current attribute settings for the TCP6SAM process.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
DETAIL
specifies that the display is to include additional detailed information on the object.
PROCESS TCP6MAN-name
is the name of the socket access method process (TCP6SAM). If you omit the
object name, SCF uses the assumed object name. For information about the
ASSUME command, see the SCF Reference Manual for G-Series RVUs or the
SCF Reference Manual for H-Series RVUs.
TCP6MAN Info Process \SYSTEM.$ZZTCP
PPID............ ( 2,289) BPID................... ( 3,271)
INFO [ / OUT file-spec / ] [ PROCESS TCP6SAM-name ]
[, DETAIL]