TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-75
INFO PROCESS Command for TCP6SAM
Example
•
To request non-detailed information for the TCP6SAM process named $SAM1:
-> INFO PROCESS $SAM1
•
To request detailed information for the TCP6SAM process named $SAM1:
-> INFO PROCESS $SAM1 , DETAIL
INFO PROCESS for TCP6SAM Display Format
The format of the display for the INFO PROCESS command (shown in
Example1) is:
INFO PROCESS, DETAIL for TCP6SAM Display Format
The format of the display for the INFO PROCESS, DETAIL command for the second
example is:
TCPIPV6 Info PROCESS \MYSYS.$SAM1
*TCPSendSpace *TCPReceiveSpace *UDPSendSpace *UDPReceiveSpace
8192 8192 9216 41600
Note. an asterisk (*) an alterable attribute; however, see Considerations on page 8-79.
TCPIP Detailed Info PROCESS \MYSYS.$SAM1
*TCP Send Space ...... 8192 *TCP Receive Space .. 8192
*UDP Send Space ...... 2048 *UDP Receive Space .. 4128
*Delay Ack Time....... 20 *Delay Ack........... ON
*Keep Alive Idle...... 7200 *Keep Alive Retry Cnt 8
*Keep Alive Interval.. 75 QIO Limit........... 100%
*Host Id.............. 0D
*Host Name ........... tcp0
Program Filename..... \MYSYS.$SYSTEM.SYS02.TCP6SAM
*Debug ............... OFF
*Full Dump............ ON
*All Nets Are Local... ON
*TCP Compat 42........ ON
*EXPAND Security...... OFF
*TCP Path MTU......... OFF
*TCP Time Wait........ 60
Trace Status.......... OFF
Trace Filename .......
*RFC1323 Enable ...... ON
*TCP Init Rexmit Timeout 1000 ms
*TCP Min Rexmit Timeout. 400 ms
*TCP Listen Queue Min... 128
*Initial TTL............ 6