TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-89
INFO SUBNET Command for TCP6MAN
IPADDRESS
is the Internet address of this SUBNET and all the IP addresses of the aliases
associated with the SUBNET.
TYPE
is the SUBNET type. Possible values are Ethernet, loopback, and tunnel (either
automatic or configured).
SUBNETMASK
is a 32-bit integer that specifies which portion of the network number and the IP
host address is to be masked to define a SUBNET.
R
shows whether or not the ICMP Router Discovery Protocol (IRDP) has been
enabled on the SUBNET. The displayed value can be Y (IRDP is ON), or N (IRDP
is OFF).
INFO SUBNET for TCP6MAN Display Format (All SUBNETs)
The format of the display for the INFO SUBNET command is:
Name
is the name of the SUBNET.
Devicename
is the name of the SLSA LIF that provides access to the Ethernet LAN. Note that
with loopback SUBNETs, the value \NOSYS.NOIOP, meaning no system, no
device name, is displayed. This value is displayed because loopback SUBNETs
are routed internally so that there is no device name to display.
TCPIPV6 Info SUBNET \MYSYS.$ZZTCP.#ZPTM3.*
AF_INET:
Name Devicename *IPADDRESS TYPE *SUBNETMASK *R LNP
SN2 \MYSYS.LAN14 172.16.214.28 ETHERNET %HFFFFFF00 N 1
SN1 \MYSYS.LAN12 172.16.214.27 ETHERNET %HFFFFFF00 N 0
LOOP0 127.0.0.1 LOOP %HFF000000 N 0
AF_INET6:
Name Devicename LinkLevelAddress TYPE
SN2 \MYSYS.LAN14 fe80::a00:8eff:fe04:6eee ETHERNET 1
SN1 \MYSYS.LAN12 fe80::a00:8eff:fe04:6ef2 ETHERNET 0
LOOP0 ::1 LOOP 0
TUN ::172.16.214.27 A-TUNNEL 0
IPT1 ::172.16.214.27 C-TUNNEL 0
Note. An asterisk (*) represents an alterable attribute.