TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6

HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008

8-98

LISTOPENS Command

QIO

shows whether or not the SUBNET is currently using the QIO interface. QIO is

always on for Ethernet type SUBNETs. ON indicates that the interface is currently

using QIO mode. OFF indicates that the interface is not currently using QIO mode.

shows whether or not the ICMP Router Discovery Protocol (IRDP) has been

enabled on the SUBNET. The displayed value can be Y (IRDP is ON), or N (IRDP

is OFF).

LISTOPENS Command

The LISTOPENS command returns information on openers of the TCP6MONs.

This is a nonsensitive command.

LISTOPENS MON Command for TCP6MAN

The LISTOPENS MON command displays information identifying the origins of the

connections in a given TCP6MON or in all TCP6MONs.

Command Syntax

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

MON $ZZTCP.#ZPTM{0-F }

is the name of the TCP6MON object. If you omit the object name, SCF uses the

assumed object name. For information about the ASSUME command, see the

SCF Reference Manual for G-Series RVUs or the SCF Reference Manual for H-

Series RVUs.

DETAIL

specifies that the display is to include additional detailed information on the object.

Examples

•

To request non-detailed information about the openers of the specified process:

-> LISTOPENS MON $ZZTCP.#ZPTM1

LISTOPENS [ /OUT file-spec/ ] [ MON $ZZTCP.#ZPTM{0-F } ]

[,DETAIL ]