TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-100
LISTOPENS MON Command for TCP6MAN
LISTOPENS MON, DETAIL Display Format
The format of the display for the LISTOPENS MON, DETAIL command is:
OPENER
is the system name and process name of a opener of the TCP6SAM Process.
PPID
is the primary processor and process ID of the opener.
BPID
is the backup processor and process ID of the opener.
PLFN
is the logical file number of the primary opener process.
BLFN
is the logical file number of the backup opener process.
PROTO
is the protocol of the opener.
STATE
is the state a particular socket is in. Only sockets with TCP protocol have states
associated with them. The possible state values are: CLOSED, LISTEN, SYN-
SENT, SYN-RCVD, ESTAB, CLOSING, FIN-WAIT-1, FIN-WAIT-2, TIME-WAIT,
CLOSE-WAIT, LAST-ACK, and FAIL-WAIT.
SENDQ
specifies the number of bytes of data in the send queue and receive queue of the
socket
TCPIPV6 LISTOPENS MON \MYSYS.$ZZTCP.#ZPTM3
<DETAIL-DISPLAY>
OPENER $ZNET PPID 0,47 BPID PLFN 3 BLFN 0
PROTO #ZSPI STATE SENDQ 0 RECVQ 0
LADDR 0.0.0.0 LPORT *
FADDR 0.0.0.0 FPORT *
OPENER $ZPORT PPID 0,47 BPID PLFN 3 BLFN 0
PROTO TCP STATE LISTEN SENDQ 0 RECVQ 0
LADDR 0.0.0.0 LPORT FTP
FADDR 0.0.0.0 FPORT *