TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-114
STATS MON Command for TCP6MAN
Whenever a RESET option is included, the counters associated with the specified
objects are displayed and reset to 0, and the timestamp for the reset is recorded. Any
STATS command returns the time at which the current statistics were sampled and the
time at which the counters were last reset.
This is a nonsensitive command except when used with the reset option. When used
with the reset option, it is a sensitive command.
STATS MON Command for TCP6MAN
The STATS MON command displays the NonStop TCP/IPv6 subsystems statistics for
each of the protocol layers in a given TCP6MON or in all configured TCP6MONs.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
MON $ZZTCP.#ZPTMn.mon-name
is the name of the TCP6MON. The fully-qualified TCP6MON name is
$ZZTCP.#ZPTM{0-F}.mon-name. If you omit the object name, SCF uses the
assumed object name. For information about the ASSUME command, see the
SCF Reference Manual for G-Series RVUs or the SCF Reference Manual for H-
Series RVUs.
RESET
resets the statistical counters to zero.
Examples
To request statistics about the specified TCP6MON:
-> STATS MON $ZZTCP.#ZPTM2
STATS [ / OUT file-spec / ] [MON $ZZTCP.#ZPTMn.mon-name]
[ , RESET ]