TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-119
STATS MON Command for TCP6MAN
Statistics Definitions (in Alphabetic Order)
Reset Time
is the time at which the counters were last initialized (set to zero).
Sample Time
is the time at which the statistics were sampled.
Description of Statistics for the TCP Layer
ACK Packets Sent
is the number of ACK packets sent.
Bad Checksum
is the number of packets received with invalid checksum values.
Bad Offset
is the number of packets received with invalid data offsets in their TCP headers. An
invalid data offset usually indicates that either the sender of the packet made an
internal error in generating the packet, or the receiver of the packet had a byte-
swapping problem. This error is rare and is usually seen only during the
development of the protocol.
Bad Sequence
is the number of packets with bad sequence numbers.
Bytes Recv After Win
is the number of bytes received exceeding the window boundary.
Conn Dropped Timeouts
is the number of connections dropped in a transmit timeout.
Connections Closed
is the number of connections closed (this value includes the number of
connections dropped).
Connections Dropped
is the number of connections dropped.
Control Packets Sent
is the number of SYN, FIN, and RST control packets sent.