TCP/IPv6 Configuration and Management Manual (G06.24+)

HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
1-1
1 Quick Start
This manual documents NonStop TCP/IPv6 only; it does not document Parallel Library
TCP/IP. However, if you configure NonStop TCP/IPv6 in INET mode, NonStop
TCP/IPv6 is a direct replacement for Parallel Library TCP/IP.
This section provides examples for starting NonStop TCP/IPv6 in INET and DUAL
modes. This section does not provide background information about IPv6; to gain a
more in-depth understanding of IPv6, see Appendix A, IPv6 Fundamentals, and About
This Manual for a list of industry resources on the topic.
This section also does not explain the examples. For an explanation of the examples in
this section and for procedures for adding more features such as routes and
round-robin filtering as well as for how to configure the subsystem in INET6 mode, see
Section 5, Example Illustrations and Adding Features to the Basic Configuration.
Procedures provided in this section include:
•
I. Prepare to Install and Configure NonStop TCP/IPv6 on page 1-2
•
IIA. Install NonStop TCP/IPv6 (#ZZTCP is not in the Configuration Database) on
page 1-4
OR
•
IIB. Install NonStop TCP/IPv6 (#ZZTCP is in the Configuration Database) on
page 1-5
•
IIIA. Configure the NonStop TCP/IPv6 Subsystem for INET Mode on page 1-6
OR
•
IIIB. Configure the NonStop TCP/IPv6 Subsystem for DUAL Mode on page 1-15
•
IVA. Prepare to Start the Applications (Without LNP) on page 1-21
OR
•
IVB. Prepare to Start the Applications (With LNP) on page 1-21
•
VA. Start the Applications (Without LNP) on page 1-22
OR
•
VB. Start the Applications (With LNP) on page 1-22
•
VI. Add More Features on page 1-24