TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-149
STATS PROCESS Command for TCP6SAM
PKTs Recv After Window
is the number of packets received exceeding the window boundary.
Retransmitted Bytes
is the number of bytes retransmitted.
Retransmitted Packets
is the number of packets retransmitted. Packets are retransmitted when a packet is
not acknowledged within a certain time period. Packets can be retransmitted for
any of these reasons: the network is overloaded; the other end of the connection is
overloaded (so that appropriate acknowledgments cannot be received or sent); or
a corrupted packet (that is, a packet with an invalid checksum) has been received.
Retransmit Timeouts
is the number of retransmit timeouts.
RTT Updated
is the number of round-trip times updated.
Segments RTT
is the number of segments where round-trip time was attempted.
Too Much ACK Received
is the number of ACK packets received for unsent data.
Total Packets Input
is the number of packets received.
Total Packets Output
is the number of packets sent down to the IP layer.
Urgent Packets Recv
is the number of packets received with the URG bit set.
Urgent Packets Sent
is the number of packets sent with the URG bit set.
Window Probes Sent
is the number of window probes sent.
Window Update PKT Sent
is the number of window update packets sent.