TCP/IPv6 Configuration and Management Manual (G06.24+)

Quick Start
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
1-4
IIA. Install NonStop TCP/IPv6 (#ZZTCP is not in the
Configuration Database)
Reference Manual for G-Series RVUs or the SCF Reference Manual for H-
Series RVUs.
IIA. Install NonStop TCP/IPv6 (#ZZTCP is not in
the Configuration Database)
If you do not already have #ZZTCP in the system configuration database, follow this
procedure for installing NonStop TCP/IPv6.
1. Check considerations that affect your configuration by reviewing the TCP/IPv6
Migration Guide.
2. Add the TCP6MAN process to the system configuration database by entering
these SCF commands:
(For more information about SCF commands for the configuration database, see
the SCF Reference Manual for the Kernel Subsystem.)
3. Check that $ZZTCP has been added to the system configuration database by
entering this SCF command:
->SAVE CONFIGURATI0N 01.04
Note. See Configuration Database Management on page 6-14 and Falling Back to
Conventional TCP/IP or Parallel Library TCP/IP on page 6-26.
->ADD PROCESS $ZZKRN.#ZZTCP,BACKUPCPU 1, DEFAULTVOL &
$SYSTEM.SYSTEM, HOMETERM $ZHOME, NAME $ZZTCP, &
OUTFILE $ZHOME, PRIMARYCPU 0, PRIORITY 180, &
PROGRAM $SYSTEM.SYSTEM.TCP6MAN, STARTMODE SYSTEM, &
STARTUPMSG "<BCKP-CPU>", STOPMODE SYSMSG
->INFO PROCESS $ZZKRN.#ZZTCP, DETAIL