TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-163
STATS SUBNET Command for TCP6MAN
Reset Time
is the time when the counters were last reset to zero.
Name
is the name of the route.
Route Usage
is the number of times this route was used to send IP datagrams.
STATS SUBNET Command for TCP6MAN
The STATS SUBNET command displays the statistical information for the specified
SUBNETs in a given TCP6MON or in all configured TCP6MONs.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SUBNET $ZZTCP.#ZPTMn.subnet-name
is the name of the SUBNET. The fully-qualified name of the SUBNET is
$ZZTCP.#ZPTM{0-f}.subnet-name. You can substitute the wild card (*) for the
TCP6MON name; doing so yields statistical information for SUBNETs configured
on all TCP6MONs. If you omit the object name, SCF uses the assumed object
name. For information about the ASSUME command, see the SCF Reference
Manual for G-Series RVUs or the SCF Reference Manual for H-Series RVUs.
RESET
resets the statistical counters to zero.
DETAIL
requests the detailed status information for the SUBNET.
Examples
•
To request statistics for SUBNETs for starting with SN:
-> STATS SUBNET $ZZTCP.#ZPTM3.SN*
STATS [ / OUT file-spec / ]
[SUBNET $ZZTCP.#ZPTMn.subnet-name]
[ , RESET ] [ , DETAIL ]