TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-165
STATS SUBNET Command for TCP6MAN
Filter Errors
indicates the number of errors received from SLSA for filter registrations.
Filter Timeouts
indicates that the filter registration is not receiving a reply from SLSA in the allowed
time.
Output Packets
is the number of packets sent by the SUBNET.
Input Packets
is the number of packets received by the SUBNET.
Output Errors
is the number of errors that occurred when packets were sent by the SUBNET.
Each output error also generates one of these operator messages:
DEVICE READ ERROR error ON IOP iopname
DEVICE WRITE ERROR error ON IOP iopname
ERROR error ON IOP iopname
Input Errors
is the number of errors detected when packets were received by the SUBNET.
Each input error also generates one of these operator messages:
DEVICE READ ERROR error ON IOP iopname
DEVICE WRITE ERROR error ON IOP iopname
ERROR error ON IOP iopname
TCP filters Reg
is the number of TCP filters registered.
TCP filters Error
is the number of TCP filter registration errors.
TCP filters Dereg
is the number of TCP filters de-registered.
UDP filters Reg
is the number of UDP filters registered.
UDP filters Error
is the number of UDP filter registration errors.