TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-166
STATS SUBNET Command for TCP6SAM
UDP filters Dereg
is the number of UDP filters de-registered.
Port filters Drop
is the number of port filters dropped.
Media State Down
shows the total media down events received from the adapter.
Considerations
•
The object-name template (wild-card notation) is supported.
•
STATS is a nonsensitive command without the RESET option; it is a sensitive
command with the RESET option.
•
To initialize (set to zero) the statistical counters, use the RESET option. STATS,
RESET is sensitive.
•
The STATS command returns the time at which the current statistics were sampled
and the time at which the counters were last reset.
STATS SUBNET Command for TCP6SAM
The STATS SUBNET command displays the statistical information for the specified
SUBNETs in the processor containing the TCP6SAM process.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SUBNET $TCP6SAM-process.subnet-name
is the name of the SUBNET. The fully-qualified name of the SUBNET is
$TCP6SAM-process.subnet-name. If you omit the object name, SCF uses the
assumed object name. For information about the ASSUME command, see the
SCF Reference Manual for G-Series RVUs or the SCF Reference Manual for H-
Series RVUs.
RESET
resets the statistical counters to zero.
STATS [ / OUT file-spec / ]
[SUBNET $TCP6SAM-process.subnet-name]
[ , RESET ] [ , DETAIL ]