TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-186
STATUS SUBNET Command for TCP6MAN
YES-PRIMARY
indicates that this SUBNET is failover-capable and has the same SUBNET IP
address as another SUBNET.
YES-BACKUP
indicates that this SUBNET is failover-capable and has the same SUBNET IP
address as another SUBNET.
NO
indicates that this SUBNET does not have the same SUBNET IP address as
another SUBNET.
Alias
indicates that this SUBNET has been configured for IP aliasing addresses.
A-SUBNET
is the associated SUBNET in a failover pair.
M-State
is in the UP state when the SUBNET’s adapter has detected a link pulse from the
network connection. A DOWN state indicates problems with the cabling or the
associated network equipment.
IPv6
indicates, when designated with YES, that this SUBNET is enabled for IPv6 use.
NO indicates this SUBNET is disabled for IPv6 use. DEFER indicates the IPv6
capability for this SUBNET is in deferred mode because the associated LIF is not
in the UP state.
IPv4
indicates, when designated with YES, that this SUBNET is configured with an IPv4
address. NO indicates this SUBNET is not configured with an IPv4 address.