TCP/IPv6 Configuration and Management Manual (G06.24+)
SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-189
STATUS SUBNET Command for TCP6MAN
IPv6 Flags
show the type of IPv6 address or scope (or both) of the IPv6 multicast
address. Possible values are (For information about multicast addressing, see the
TCP/IP Programming Manual):
Creation Type
is the creation or configuration type of the address. Possible values are:
V4LOCAL IPv4 compatible address
ORGLOCAL Organization local scope multicast address
SITELOCAL Site local IPv6 address or scope of multicast address
NODELOCAL Node local scope multicast address
LINKLOCAL Link local IPv6 address or scope of multicast address.
MULTICAST IPv6 multicast address
DEPRECATED IPv6 address in deprecated state
TENTATIVE IPv6 address in tentative state
DADFAILED IPv6 address failed duplicate address detection
INVALID IPv6 address in invalid state
ANYCAST IPv6 is an anycast address
PROXY IPv6 address being used for proxy service
GLOBAL Global Unicast IPv6 address or scope of multicast address
STATIC Added by an operator
FAILOVER Address used in failover
BROTHER Address configured using an address from the SUBNET's
associated failover SUBNET
LINK LOCAL Created using the SUBNET's interface ID
PREFIX Created using a static prefix (IPV6PREFIX attribute)
FULL IPV6 Configured from a static IPv6 address (IPV6ADDRESS
attribute)
RA PREFIX Created from a prefix received in a router advertisement
ALIAS Configured with an IPv6 address which added after failover
association was performed.
RESERVED IP Configured from an address specified using the
IPV6RESERVEDID attribute