TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-212
DETAIL Command
For a description of the notation scheme used here, see the Notation Conventions on
page xx.
For information on starting PTrace and entering PTrace commands, and for more
detailed descriptions of the standard PTrace commands available to all subsystems,
see the PTrace Reference Manual.
DETAIL Command
The DETAIL command controls the detailed display option. When DETAIL is set to ON,
PTrace displays extended formatted versions of some records (for example, ARP
traffic).
Command Syntax
ON
turns on detailed display mode.
OFF
turns off detailed display mode.
Considerations
•
The NonStop TCP/IPv6 DETAIL command is implemented in the standards defined
in the PTrace Reference Manual.
•
If the DETAIL command is not used, the OFF attribute is assumed.
•
If DETAIL is specified without the ON or OFF attribute, the ON attribute is
assumed.
•
The RESET and FROM commands set the DETAIL command to OFF.
HEX Command
The HEX command controls the hexadecimal display option. When HEX is set to ON,
PTrace displays a hexadecimal dump of trace-file records (excluding the record
header), with character equivalents printed to the right of the dump.
DETAIL [ ON | OFF ]