TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
8-213
LABEL Command
Command Syntax
ON
turns on hexadecimal display mode.
OFF
turns off hexadecimal display mode.
Considerations
•
The NonStop TCP/IPv6 HEX command is implemented in the standards defined in
the PTrace Reference Manual.
•
If the HEX command is not used, the OFF attribute is assumed.
•
If HEX is specified without the ON or OFF attribute, the ON attribute is assumed.
•
The RESET and FROM commands set the HEX command to OFF.
LABEL Command
The LABEL command controls the formatted display of trace records.
Command Syntax
ON
turns on the formatted display of trace records. The default value is ON.
OFF
turns off the formatted display of trace records, but the record header for the trace
record is displayed.
Considerations
•
If the LABEL command is not used, the ON attribute is assumed.
•
If LABEL is specified without the ON or OFF attribute, the ON attribute is assumed.
•
The RESET and FROM commands set the LABEL command to ON.
HEX [ ON | OFF ]
LABEL [ ON | OFF ]
Note. The LABEL ON command is the only way to display NonStop TCP/IPv6 trace records.