TCP/IPv6 Configuration and Management Manual (G06.24+)
Quick Start
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
1-12
Configure the Subsystem for INET Mode, Ethernet
Failover, and Shared IP, With LNP
Example 1-5. TCPIPUP5 Command File, INET-Mode, Ethernet Failover, Shared IP,
with LNP
CLEAR ALL
SCF/INLINE/
INLPREFIX +
+ ASSUME PROCESS $ZZTCP
+ START MON *
+ DELAY 30
== Configure the loopback SUBNET ==
+ ABORT SUBNET LOOP0
+ ALTER SUBNET LOOP0, IPADDRESS 127.1
+ START SUBNET LOOP0
== Add Host Id and Host Name information (optional)
+ ALTER MON *, HOSTID 172.14.215.27, HOSTNAME "www.company.com"
==Add a SUBNET for IPv4 support with Ethernet
==failover, shared IP, for the default LNP.
+ ADD SUBNET SN1,TYPE ETHERNET,IPADDRESS 172.14.215.27, &
DEVICENAME L016, SUBNETMASK 255.255.255.0, &
FAILOVER SHAREDIP
==Add a second SUBNET for Ethernet failover, sharing the
==same IPv4 address but using a different LIF, for the
==default LNP
+ ADD SUBNET SN2, TYPE ETHERNET,IPADDRESS 172.14.215.27, &
DEVICENAME L017, SUBNETMASK 255.255.255.0, &
FAILOVER SHAREDIP
==Add a SUBNET for IPv4 support with Ethernet
==failover, shared IP, for a configured LNP.
+ ADD SUBNET SN3,TYPE ETHERNET,IPADDRESS 172.14.200.28, &
DEVICENAME L019, SUBNETMASK 255.255.255.0, &
FAILOVER SHAREDIP, LNPTPLIST "$ZSAM2, $ZSAM3"
==Add a second SUBNET for Ethernet failover, sharing the
==same IPv4 address but using a different LIF, for the
==configured LNP
+ ADD SUBNET SN4,TYPE ETHERNET,IPADDRESS 172.14.200.28, &
DEVICENAME L01A, SUBNETMASK 255.255.255.0, &
FAILOVER SHAREDIP, LNPTPLIST "$ZSAM2, $ZSAM3"
==Associate the SUBNETs as failover pairs and establish
==reserved IPv4 addresses
+ ALTER SUBNET SN1, ASSOCIATESUB "SN2", RESERVEDIP 172.12.215.29
+ ALTER SUBNET SN3, ASSOCIATESUB "SN4", RESERVEDIP 172.12.200.29
== Add default gateway routes to both SUBNETs in failover pair
+ ADD ROUTE GW1, DESTINATION 0.0.0.0, GATEWAY 172.14.215.1 &
SUBNET "SN1"
+ ADD ROUTE GW2, DESTINATION 0.0.0.0, GATEWAY 172.14.215.1 &
SUBNET "SN2"
+ ADD ROUTE GW3, DESTINATION 0.0.0.0, GATEWAY 172.14.200.1 &
SUBNEET "SN3"
+ ADD ROUTE GW4, DESTINATION 0.0.0.0, GATEWAY 172.14.200.1 &
SUBNET "SN4"
== Start all SUBNETs and ROUTEs
+ START SUBNET *
+ START ROUTE *
INLEOF