TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Error Messages
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
C-3
TCPIPV6 00010
Cause. TCP/IP cannot communicate with the manager process to obtain the MTU
size.
Effect. The command is not executed.
Recovery. Check or start the manager process.
TCPIPV6 00011
Cause. The IP address is invalid.
Effect. The command is not executed.
Recovery. Use a correct IP address.
TCPIPV6 00012
Cause. The processor number is invalid.
Effect. The command is not executed.
Recovery. Use a correct processor number.
TCPIPV6 00013
Cause. The processor number is the primary processor number.
Effect. The command is not executed.
Recovery. Use the backup CPU number.
TCPIPV6 00014
Cause. The record size given, or implied, in a TRACE command is too small. It must
be at least 300 bytes. The minimum trace record size for TCPIPV6 has expanded to
accommodate additional trace information kept by the TCPIPV6 subsystem.
TCPIPV6 E00010 SNAP MTU not available.
TCPIPV6 E00011 Invalid IP address.
TCPIPV6 E00012 Invalid CPU number.
TCPIPV6 E00013 CPU is already a primary CPU.
TCPIPV6 E00014 RECSIZE must be at least 300 bytes.