TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Error Messages
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
C-4
Effect. The command is not executed.
Recovery. Use the RECSIZE parameter while starting a trace. When a larger trace
record size is used, there is less chance of trace records being truncated.
TCPIPV6 00016
Cause. This occurs when a Primary command is rejected because at least one
SUBNET is still in the started state and switching to another CPU. This takes any
started SUBNETs out of service.
Effect. The command is not executed.
Recovery. Try moving the LAN access interfaces to TCP/IP subsystem backup CPU
first.
TCPIPV6 00017
Cause. Device selected for SUBNET not available between the same CPU pair as the
TCP/IP process.
Effect. The command is not executed.
Recovery. Select a device that is available between the same CPU pair as the TCP/IP
process or stop the TCP/IP process and restart it specifying a CPU pair that has
access to the device.
TCPIPV6 00018
Cause. Physical access to the device does not exist. Either the device is not installed
or a failure has occurred.
Effect. The command is not executed.
Recovery. Select a device that is available or correct the problem.
TCPIPV6 00019
Cause. Incorrect device name specified.
TCPIPV6 E00016 Primary not allowed, some subnets still in
STARTED state.
TCPIPV6 E00017 Device access not available from same CPU as
TCPMAN.
TCPIPV6 E00018 Device access not available from any CPU.
TCPIPV6 E00019 Unknown LIF device name.